Intenza 550GC Serie Manuel Du Propriétaire page 8

EN
WARNING If there are large fluctuations in temperature,
please allow the bike to acclimatise to the surrounding
temperature before proceeding with assembly.
Ensure that bolts are tightened with significant force to
minimise loosening during use. If bolts are loosened after
initial assembly, we recommend using medium—strength
LOCTITE ® 243 when reassembling.
550GC Series Cycle Assembly Instructions
STEP 1
Assemble the front Stabliser
COMPONENTS AND TOOLS
Dome screw, M8 x 15L (12), Washer, M8 (14)
STEP 3
Assemble the front Stabliser Cover
COMPONENTS AND TOOLS
Dome screw, M4 x 10L (13)
STEP 2
Assemble the rear Stabliser
COMPONENTS AND TOOLS
Dome screw, M8 x 15L (12), Washer, M8 (14)
STEP 4
Assemble the rear Stabliser Cover
COMPONENTS AND TOOLS
Dome screw, M4 x 10L (13)
Intenza 550GC Series Cycle Handbook: 550GC Series Cycle Assembly Instructions 7