Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
WARNING!
Attach the pedal marked R on the right crank
and tighten by turning clockwise (standard right—hand
thread). Attach the pedal marked L on the left crank and
tighten by turning counter—clockwise (left—hand thread).
Please make sure that both pedals are fastened with
sufficient force (55 NM), to ensure that the bolt does not
become loose during use.
The threads are provided with TufLok
at the factory
®
to prevent them from becoming loose during use. If bolts
are loosened after initial assembly, we recommend using
medium—strength LOCTITE
®
243 when reassembling.
550GC Series Cycle Assembly Instructions
STEP 13
Assemble the Pedal assy, L, standard
STEP 14
Assemble the Pedal assy, R, standard
Intenza 550GC Series Cycle Handbook: 550GC Series Cycle Assembly Instructions
11
Publicité
Table des Matières
