Intenza 550GC Serie Manuel Du Propriétaire page 17

EN
WARNING
Ensure that all levers (vertical and horizontal)
are closed, before sitting on the bike and always step off
the bike when making adjustments to the handlebars
and/or saddle.
16
Adjusting The Saddle Height
Sit on the saddle and ensure that your hip is not tilted to one side when the pedal has assumed the position as shown in the picture.
Place your shoes in the toe clips (cages) on the pedals, or in the SPD cleats if you are using cycling shoes, if your Group Cycle is not
fitted with a combi pedal system. Reduce your risk of injury and enjoy a more comfortable ride by adjusting the seat height so that
there is a slight bend (25—35 degrees) in your knee at the bottom of a pedal stroke.
MAXIMUM HANDLEBAR VERTICAL HANDLEBAR
HEIGHT INDICATOR ADJUSTMENT
OPEN
CLOSED
Adjusting The Saddle Horizontally
Properly positioning the saddle horizontally is very important in order to avoid injury to the knees. Sit on the saddle and move the
pedals until the crank arms are in a horizontal position. The knee of your forward—facing leg should be positioned directly above the
centre of the pedal. If this does not correspond to your bike's setting, please align the horizontal saddle adjustment to the front or
rear in order to attain this seat position.
HORIZONTAL
HANDLEBAR ADJUSTMENT
OPEN
CLOSED
Intenza 550GC Series Cycle Handbook: How To Adjusting Intenza 550GC Series
VERTICAL SADDLE MAXIMUM SEAT
HEIGHT INDICATOR
ADJUSTMENT
OPEN
CLOSED
HORIZONTAL
SADDLE ADJUSTMENT
CLOSED OPEN