Intenza 550GC Serie Manuel Du Propriétaire page 15

EN
IMPORTANT
A complete visual inspection, and test of the
features and functions of the assembled exercise bicycle
should be made prior to use.
Please do not unscrew the levelling feet more
than 1 cm. The free standing 550GC Series can only be
installed and operated on a stable and leveled floor.
14
Moving and Leveling 550GC Series Cycle
It is recommended that two people move 550GC Series Cycle.
In order to prevent accidents and damage to the handlebar plug—in sockets, it is necessary to firmly fix vertical handlebar adjustment
before the wheel is tilted. Please be extra cautious when moving 550GC Series Cycle over uneven surfaces: it is advised
that a second person assist in order to prevent the cycle from tilting to one side.
Allow a minimum safety distance away from the nearest equipment, objects or walls as illustrated below.
Stand in front of the bike, grasp the handlebars and tilt the bike towards you until the transportation wheels are touching the floor.
Roll the bike to the desired location, then gently lower the rear of the bike back to the floor.
Leveling 550GC Series Cycle
Check the stability of where 550GC Series Cycle is to be operated and if necessary adjust the levelling feet underneath the front, or rear,
stabilisers to ensure the desired stability.
stable at all times. To adjust, turn the leveling feet counterclockwise to decrease the height or clockwise to increase the height until
the bike is stable.
LEVELLING FEET
It is important that all four of the leveling feet touch the ground in order to keep the bike
Intenza 550GC Series Cycle Handbook: Moving and Leveling The 550GC Series Cycle