Movie Frame (24 Fs) - Samsung BD-P1590 Mode D'emploi

Masquer les pouces Voir aussi pour BD-P1590:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Movie Frame (24 Fs)

Movies are usually fi lmed at 24 frames per second. Some
Blu-ray Discs have the capability of playing back at this
frame rate. Setting the Movie Frame (24Fs) feature to ON
allows you to adjust the Blu-ray Disc Player's HDMI output
to 24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
material (30 frame). When the setting switches between Movie (24 frame) and Video (30 frame),
the screen may blink for a few seconds.
resolution
Sets the output resolution of the Component and HDMI
video signal.
The number in 480i, 480p, 720p, 1080p and 1080i
indicates the number of lines of video. The i and p indicate
indicates the number of lines of video. The i and p indicate
interlace and progressive scan, respectively.
- BD Wise : Automatically sets the optimal resolution
when connected via HDMI to a TV with the BD Wise
feature.
(The BD Wise menu item appears only if BD Wise is set
to On.)
- 1080p : Outputs 1080 lines of progressive video (HDMI only).
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines of progressive video.
- 480i : Outputs 480 lines of interlaced video (Component only).
If the connected TV does not support Movie Frame or the
selected resolution, you will see the following message:
If you select Yes and the resolution is not supported, the
TV's screen will be blank. Please wait for 15 seconds and
the resolution will be reverted to the previous value
automatically.
M
If the screen is blank, press and hold the SKIP (]) button on the front of the player for more than 5
seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous
page to access each mode and select the Display Setup that your TV will support.
When the factory default settings are restored, all the user data stored in the BD data will be deleted.
System
Music
Language
Photo
Audio
Setup
Display
No disc
HDMI
Network
Parental
System
Music
Language
Photo
Audio
Setup
Display
No disc
HDMI
Network
Parental
System
Music
Language
Photo
Audio
If no pictures are shown after the selection,
Setup
Display
No disc
please wait for 15 seconds. And then,
!
HDMI
the resolution will be reverted
Network
to the previous value automatically.
Parental
Would you like to make a selection?
Yes
) button on the front of the player for more than 5
) button on the front of the player for more than 5
TV Aspect
: 16:9 Normal
Movie Frame (24 Fs)
: PCM
On
Resolution
: 1080p
Off
Progressive Mode
: Auto
Still Mode
: Auto
Screen Message
: On
Front Display
: Bright
TV Aspect
: 16:9 Normal
Movie Frame (24 Fs)
: Off
Resolution
: PCM
1080p
1080i
Progressive Mode
: Auto
720p
Still Mode
: Auto
480p
Screen Message
: On
480i
Front Display
: Bright
TV Aspect
: 16:9 Normal
Movie Frame (24 Fs)
: Off
Resolution
: 1080p
Progressive Mode
: Auto
Still Mode
: Auto
Screen Message
: On
Front Display
: Bright
No
English _1

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Bd-p1590cBd-p1600

Table des Matières