Using The Audio Menu - Sony KV-27FV310 Mode D'emploi

Using the Audio
To access the Audio menu, use the following steps:
To Display To Highlight
Press to highlight an option; then press
f
Press
Treble
pitched sounds.
Press
Bass
pitched sounds.
Press
Balance
Use the
Steady Sound
to select it.
On:
Off:
Use the
Effect
to select it.
Simulated:
WOW:
TruSurround: Produces a dynamic three-dimensional sound for stereo audio
Off:
✍
Press to directly select Effect settings (Simulated, WOW, TruSurround, Off).
Use the
MTS
Multi-Channel to select it.
TV Sound
Stereo:
Auto SAP: Select to have the TV automatically switch to a Second Audio
Mono:
✍
Press to directly select MTS settings (Stereo, Auto SAP, Mono).
✍
If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output
sound, change your Audio MTS setting to Stereo or Mono.
Menu
To Select
.
G to decrease the higher pitched sounds. Press
G to decrease the lower pitched sounds. Press
G to emphasize the left speaker. Press
F or f buttons to highlight one of the following options, then press
Select to stabilize the volume when changing the channels.
Select to turn Steady Sound Off.
F or f buttons to highlight one of the following options, then press
Simulates theater quality sound for mono programs.
Provides a dramatic presence with a full, deep bass sound.
When WOW is enabled, BBE is activated to further enhance
the audio performance.
signals.
Provides normal stereo or mono reception.
F or f buttons to highlight one of the following options, then press
Select when viewing a broadcast in stereo.
Program (SAP) when a signal is received.
Select to reduce noise in areas of poor reception.
Using the Menus
Video Audio Channel Parent
Treble
Bass
Balance
Steady Sound: Off
Effect: TruSurround
MTS: Stereo
Speaker: On
Audio Out: Variable
High frequency sound
Move: Select:
g to increase the higher
g to increase the lower
g to emphasize the right speaker.
Timer Setup Basic
Adjust
End:
31