Safety; Intended Use - WIKA LH-10 Mode D'emploi

1. General information / 2. Safety
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage to equipment or the
environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and trouble-free operation.
WARNING!
... indicates a potentially dangerous situation that can result in burns, caused by hot surfaces or liquids, if
not avoided.

2. Safety

WARNING!
Before installation, commissioning and operation, ensure that the appropriate submersible pressure trans-
mitter has been selected in terms of measuring range, design and specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
Further important safety instructions can be found in the individual chapters of these operating instructions.

2.1 Intended use

The submersible pressure transmitter is used to convert hydrostatic pressure into an electrical signal.
The instrument is suitable for operation within an ambient temperature range from -10 ... +50 °C.
The instrument has been designed and built solely for the intended use described here, and may only be used
accordingly.
WIKA operating instructions submersible pressure transmitter, model LH-10
EN
5