Dismounting, Return And Disposal - WIKA LH-10 Mode D'emploi

9. Dismounting, return and disposal

9. Dismounting, return and disposal
WARNING!
Residual media in the dismounted instrument can result in a risk to persons, the environment and
equipment. Take sufficient precautionary measures.
9.1 Disassembly
WARNING!
Risk of burns!
Let the instrument cool down sufficiently before dismounting it!
During dismounting there is a risk of residual, dangerously hot media.
9.2 Return
WARNING!
Strictly observe the following when shipping the submersible pressure transmitter:
All submersible pressure transmitters delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.).
When returning the instrument, use the original packaging or a suitable transport package.
To avoid damage:
1. Mount the protection cap.
2. Wrap the instrument in an antistatic plastic film.
3. Place the instrument along with shock-absorbent material in the packaging. Place shock-absorbent material evenly
on all sides of the transport packaging.
4. If possible, place a bag containing a desiccant inside the packaging.
5. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our local website.
9.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compatible way and in accordance
with the country-specific waste disposal regulations.
WIKA operating instructions submersible pressure transmitter, model LH-10
EN
15