Maintenance And Care - KIKKA BOO NUTRI WOOD Mode D'emploi

Congratulations on your purchase. To ensure maximum protection and optimum comfort for your child, it is essential that you read through the entire
manual carefully and follow all instructions. Read these instructions carefully before assembly and use and keep for future reference. The child may be
hurt if you do not follow these instructions.
WARNINGS
• This highchair is intended for children able to sit up unaided (usually around 6 months) and up to 3 years or a maximum weight of 15kg.
• This highchair can be used as a junior chair. Junior chair mode is suitable from 36 months (3 years) to approx 5 years.
Be aware of the risk of open res and other sources of strong heat, such as electric bar res, gas res etc. in the vicinity of the highchair.
• Never leave the child unattended. Always keep child in view while in the highchair.
• Position the highchair on a at, even and horizontal oor and do not elevate the highchair on any structure or table.
• FALLING HAZARD: Prevent your child from climbing on the product.
• Be aware of the risk of tilting when your chiId can push its feet against a table or any other structure.
• DO NOT allow the child to climb or stand on or inside of this highchair. lt is not a step stool or ladder.
• To reduce the risk of injury, position the highchair away from furniture, walls, hot surfaces and liquids, window covering cords and electrical cords and
position the highchair away from furniture when the highchair is being used at a table with the tray removed.
• The highchair should only be used once the child is capable of reliably and consistently sitting upright. This is usually around 6 months of age.
• Your child MUST ALWAYS be secured with the harness.
• Do not use the highchair if any part is broken, torn or missing. Do not use the highchair unless all components are correctly tted and adjusted.
• Regularly check all connections to ensure they are tight.
• Keep the plastic packaging away from children to avoid danger of su ocation.
Conforms to EN 14988:2017
I. PARTS LIST
Please check every part and follow up the assembling steps for complete baby high chair. Do not use the product if any part is broken or missing.
1. Chair Seat (1 pcs); 2. Dinner plate(2 pcs); 3. Upper seat legs(4 pcs); 4. Lower seat legs (4 pcs); 5. Foot Touch parts (4 pcs); 6. Foot pedal(1 pcs); 7. Screw
/ Nuts (2 pcs);
II. ASSEMBLY
1. Cover the PU cushion onto the seat.
2. Fix the ve-point belt to the seat. (Fig-1)
3. Take out the upper seat legs.
4. Select the two legs with more holes and buckle them into the front side.
5. Then buckle the other two legs into the back side.
6.Take out the lower seat legs and buckle them onto the upper legs. (Fig-2)
7. Align the holes of the pedal with the screw holes on the iron tube and lock it with a screw and nut.
8. Align the dinner plate with the buckles on the both sides of the seat until the plate is completely stuck.(Fig-3)
9. Add the foot touch parts onto the seat legs, make sure the angles t perfectly with ground. (Fig-4) (Fig-5)
10. It is super easy to make it be a junior seat by removing the lower seat legs. (Fig-6)
III. USE OF SEAT BELT (FIVE- POINT SAFETY BELT):
Please make sure to fasten the seat belt when your child are sitting on the chair.
IV. MAINTENANCE AND CARE
• In order to extend the service life of the highchair, you can use warm water and soft towel to gently wipe the seat surface.
• Do not use abrasive cleaners, so as to avoid damage to the surface of the chair.
• When not using the chair, keep it in a dry and ventillated place out of direct sunlight.
• Please periodically check the tightness of parts such as screws and nuts to ensure safe use.
• If any part is found to be damaged, please repair it in time.
ENGLISH