Installation Declaration - Leister LHS 91 BASIC Instructions D'utilisation

Installation declaration

(in terms of the EC machinery directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Type:
Option:
– as far as it is possible from the scope of supply – fulfills the applicable essential requirements of the EC machinery
directive (2006/42).
The partly completed machinery furthermore complies with the provisions of the following EC directive(s):
EC directive(s):
Harmonised standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled
in accordance with Annex VII (part B) and will be electronically transmitted to national authorities in response
to a reasoned request. Authorised documentation representative: Patrick Rieder, Compliance Manager
The partly completed machine must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the EC machinery directive (2006/42), where
appropriate.
Kaegiswil, 28.11.2011
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose
of power tools in your household rubbish! According to the European Directive 2002/96 on waste
electrical and electric equipment and its implementation in national law, power tools which can no
longer be used must be collected separately and recycled.
Air Heater
LHS 91
BASIC or SYSTEM
Electromagnetic compatibility 2004/108
Low voltage equipment 2006/95
EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1,
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-12, EN 61000-3-11 (Z
EN 60335-2-45
Bruno von Wyl, CTO
EN 50366, EN 62233,
),
max
Beat Mettler, COO
13