Installation Declaration; Service And Repairs - Leister IGNITER BM4 Instructions D'utilisation

Installation declaration

(as defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation
Type:
- insofar as is possible from the package supplied – corresponds to the applicable fundamental requirements of
the EC Machinery Directive (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We further declare that the special technical documents according to Annex VII (Part B) have been compiled for
this incomplete machine and that we are obliged to communicate this electronically to the market supervisory
authorities upon a justified request to do so.
Name of the documentation officer: Volker Pohl, Compliance Manager
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in
which the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive
(2006/42).
Kaegiswil, 28.11.2014
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose
of power tools in your household rubbish! According to European Directive 2002/96 on waste electrical
and electric equipment and its implementation in national law, power tools which can no longer be
used must be collected separately and recycled.

Service and Repairs

• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and reliable
repair service within reasonable period, using original spare parts in accordance with the circuit diagrams
and spare parts lists.
Guarantee
• For this tool, the guarantee or warranty rights granted by the relevant distributor/seller shall apply. In case of guar-
antee or warranty claims any manufacturing or workmanship defects will either be repaired or replaced by the
distributor at its discretion. Warranty or guarantee rights have to be verified by an invoice or a delivery document.
Heating elements shall be excluded from warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
10
Hot-air blower
IGNITER BM4; IGNITER BR4
Electromagnetic Compatibility 2004/108
Low Voltage Directive 2006/95
RoHS Directive 2011/65
EN 12100
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3, EN 62233,
EN 60335-2-45, EN 50581
Bruno von Wyl, CTO Andreas Kathriner, GM