Optional Accessories; Certification - KONG Italy KOSMOS Mode D'emploi

Fig. 3 – Accessories: (G1) Standard ear protections, (G2) Ear protections with press
studs, (G3) Ear protections with Velcro, (H1) Standard Cap, (H2) Cap with ear-
plugs.
To guarantee adequate protection:
- don the helmet and rotate the adjustment device wheel (D) to adjust the size until
achieving the webbing tension (B) required to ensure suitable adherence to the
head (fig. 4),
- fasten the chin strap (C) inserting the buckles until the lock clicks,
- adjust the chin strap length to keep the helmet firm on your head, yet allowing you
to swallow and breathe freely (fig. 5); pull to check that the buckle is locked.
- install the divider (E) to ensure that the side slings of the chin strap do not scratch
the ears (fig. 6).
Warning: the helmet shall be worn perfectly centred on the head; it should
not move, either backwards, forwards, or laterally. It shall always be fastened!
(fig. 7).
How to open the chin strap (fig. 8):
Fig. 9 - Examples of incorrect and dangerous use.
Fig. 10 - Do not hang up your helmet by the size adjustment device (D).
Fig. 11 - Correct fastening of the front lamp.
7.1 – Optional accessories
The KOSMOS helmet can be combined with:
- ear protections (G) as shown in fig. 12,
- cap (H) as shown in fig. 13.
To dismount the helmet, follow the above instructions backwards.
8 – PRE AND POST USE CONTROLS
Check and make sure that:
- the shell (A) is not deformed and does not show signs of cracks or wear,
- textile parts do not show signs of wear, tear or unstitched seams,
- the size adjustment system (D) and the locking system (C and E) work as
described in pictograms No. 3, 4, 5 and 6,
- the device is suitable for the intended purpose.
9 – CERTIFICATION
This device has been certified by the notified body No. 0497 – CSI S.p.A., V.le
Lombardia, 20, 20021 Bollate, Milan, Italy.
Master text: ITALIAN
CS
DA
DE
EL
EN
ES
FI
FR
IT
NL
PT
RU
SV