Philips RESPIRONICS DreamWear Mode D'emploi page 4

Putting on the Mask
1. With the mask assembled (see Assembly section), place the cushion under the
nose and insert the pillows cushion tips into your nostrils. b
2. Position the frame on the top of the head. c
Tip: For proper sizing, see Cushion Sizing and Mask Frame Sizing sections.
3. Pull the headgear over the back of the head. d
2
Adjusting the Mask
1. Peel the headgear tabs away from the fabric. Adjust the straps length. Press the
tabs back against the fabric to reattach. e
Note: Do not overtighten the headgear. Signs of overtightening include redness,
sores, or bulging skin around the edges of the mask.
2. Position the mask until it fits comfortably. f
3. When finished the elbow should rest at the top of the head. g
5
Mask Frame Sizing
• Medium (MED) frame
• Small (SM) frame
• Large (LG) frame
3
4
6
4
7