Cleaning And Maintenance; Cleaning Pre-Filter; Service Information - Black & Decker FLEX PAD1200 Mode D'emploi

Masquer les pouces Voir aussi pour FLEX PAD1200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLeANINg AND MAINTeNANCe

WARNINg:
in water. A damp cloth and soapy water should be used to clean the exterior of the
appliance. Always make sure the appliance is completely dry before reuse or storage.
eMPTyINg The DUST CONTAINeR
The dust container must be emptied regularly, preferably after every use.
• Pull the door latch (6) and open the dust container door (5).
• Tilt appliance to empty dirt.
• Tap the back end of appliance if debris does not
fall out easily or remove filters for better access.

CLeANINg PRe-fILTeR

Both the plastic pre-filter (14) and the pleated filter
(15) are re-usable and should be cleaned regularly.
The dust container must be emptied regularly,
preferably after every use.
• Release the door latch (6) and open the door (5)
180° until it clicks in the open position.
• Empty the dust container.
• Remove the pre-filter (14).
• Clean the pre-filter by lightly shaking over a dustbin.
• Refit the pre-filter.
• Close the door and make sure that it clicks into place.
CLeANINg PLeATeD fILTeR
The pleated filter (15) prevents particles and larger
objects from entering the motor housing.
The filter is re-usable and should be cleaned regularly.
• Remove the pre-filter (14) from the appliance as
described above.
• Remove the fine pleated filter (15) by pulling
firmly.
• Tap the filter vigorously to remove loose dust from
the filter.
• If necessary, wash the filter in warm, soapy water.
• Make sure the filters are dry before replacing.
• Refit the pleated filter into the appliance.
• Refit the pre-filter.
MAINTeNANCe
Use only mild soap and damp cloth to clean the vac. Never let any liquid get inside the
vac; never immerse the battery/motor housing in liquid.
WARNINg:
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized service
centers or other qualified service organizations, always using identical replacement parts.

SeRvICe INfORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. Whether you need technical advice, repair,
or genuine factory replacement parts, contact the Black & Decker location nearest you. To
find your local service location, call: 1-800-544-6986 or visit www.blackanddecker.com
Do not, under any circumstances, immerse the appliance
Make sure the vacuum is completely dry before using it.
5
D
e
14
15

Publicité

Table des Matières
loading

Table des Matières