General Safety Instructions - MeisterCraft MWS 650 Manuel D'utilisation

5455060-Winkelschl-man_a 31.01.12 14:09 Seite 84
The user of the device must ensure
sufficient protective equipment during
use in accordance with the operating
instructions and the warning pictograms
applied to the tool. Prior to each use
and during the use of the tool, the tool
and the disc should be checked for any
electrical or mechanical damages.
If damage to the unit is determined,
stop work and contact a specialist
workshop.
Improper use
All applications carried out with the
device that are not listed in the "Proper
use" chapter will be considered
improper use.
The unit may not be used for the
following purposes:
• Processing of materials other than
those listed in the Proper use section,
• Use with a saw blade,
• Use as a stationary unit,
• As a drive for other units.
There is a risk of injury.
The user of the device is liable for all
property and personal damages
occurring as the result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks
Even when the device is used properly,
there is a residual risk that cannot be
excluded. The following potential
dangers are inherent in the type and
construction of the device:
84
• Contact with the unprotected grinding
disc,
• Grasping a still rotating grinding disc,
• Parts flying off of the grinding disc
and other parts,
• Damage to the hearing if the
prescribed ear defenders are not
worn,
• Breathing in dust,
• Electrical shock when touching non-
insulated electrical components.
If the instructions in your operating
instructions are not observed, incorrect
use may result in other residual risks.
5 – General safety
instructions for handling
power tools
I. General safety information
WARNING! Read all
safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
1 Work area
a Keep work area clean and well lit.
Cluttered and dark areas invite
accidents.
b Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create