Assembly Instructions - Konifera 676714 Notice De Montage Et D'utilisation

Assembly instructions

1. Remove pre-assembled wing nut and washer from
temperature gauge (C). Attach temperature gauge
(C) to lid (B) using the pre-assembled washer and
wing nut.
Attach handle (A) to lid (B) using two M5 x 12
screws (BB) and two M5 wing nuts (DD).
M5 x 12mm Screw
Hardware Used
M5 Wing Nut
BB
DD
2. Attach handles (A) to upper smoker body (G) using
four M5 x 12 mm screws (BB) and four M5 wing
nuts (DD).
M5 x 12mm Screw
Hardware Used
M5 Wing Nut
BB
DD
3. Attach door (H) to upper smoker body (G) using
two M4 x 15 mm screws (AA) and two M4 wing
nuts (CC).
M4 x 15mm Screw
Hardware Used
M4 Wing Nut
AA
CC
10
x 2
x 2
x 4
x 4
x 2
x 2
1
2
3