Field Of Application; Special Features - Beko FS109 Instructions D'installation Et De Fonctionnement

Further safety instructions:
• Also the applicable national regulations and safety instructions have to be observed during installation
and operation.
• The Flowsensor is not allowed to be used in explosive areas.
Additional remarks:
• Use spanner flats (SW32/SW17) for mounting purposes!
• The Flowsensor is not allowed to be disassembled!
Attention !
Malfunctions at the Flowsensor
Faulty installation and insufficient maintenance may lead to malfunctions of the
Flowsensor which may affect the measuring results and which may lead to
misinterpretations.
r.
2

Field of application

• The Flowsensor is a consumption measuring instrument for measurements within the admissible
operating parameters (see Technical Data).
• The Flowsensor measures the following parameters:
Volume flow
Consumption
Velocity
By default the volume flow is set in cfm, the consumption is set in cf (ft³) and the velocity is set in ft/min.
Other units can be programmed by BEKO TECHNOLOGIES on customers request.
• By default the Flowsensor measures in air
If requested by the customer the sensor can be programmed to other gases by BEKO
TECHNOLOGIES: Nitrogen, Argon, Helium, Carbon Dioxide, Oxygen
• The Flowsensor is mainly used in compressed air plants
• The Flowsensor is not suitable for applciation in explosive areas.
3

Special features

• Depth scale for accurate mounting
• Usable in pipe diameters from ¼"
• Easy mounting under pressure
• 4...20 mA analogue output
• Pulse output
FS 109
Field of application
5