Safety Instructions - Beko FS109 Instructions D'installation Et De Fonctionnement

Safety instructions

1 Safety instructions
Please check whether this manual corresponds with the instrument type.
Please observe all notes indicated in this instruction manual. It contains essential information
which have to be observed during installation, operation and maintenance. Therefore this
instruction manual has to be read categorically by the technician as well as by the responsible
user / qualified personnel before installation, initiation and maintenance.
This instruction manual has to be available at the operation site of the Flowsensor at any time.
In case of any obscurities or questions with regard to this manual or to the instrument please
contact BEKO TECHNOLOGIES.
Warning !
Compressed air !
Contact with quickly or abruptly escaping compressed air or bursting parts of the
system may cause severe injuries or death.
Measures:
• Do not exceed the maximum operation pressure (see type label)!
• Only use pressure-tight installation material!
• Avoid persons or objects being hit by escaping compressed air!
Warning!
Supply voltage !
Contact with supply voltage carrying non-insulated parts may cause an electric shock
with injury and death.
Measures :
• Observe all applicable regulations for electrical installations (e.g. VDE 0100)!
• Carry out maintenance work only when the system is pressureless!
• All electric works are only allowed to be carried out by authorized qualified persons.
Warning !
Inadmissible operating parameters!
Undercutting or exceeding of limit values may cause danger to persons and material
and may lead to functional and operational disturbances.
Measures:
• Do not exceed the maximum operation pressure (see type label)!
• Make sure that the Flowsensor is only operated within the admissible limit values indicated on the type
label.
• Careful observation of the performance data of the Flowsensor in connection with the application.
• Do not exceed the admissible storage and transportation temperature.
• Carry out maintenance works and calibrations in regular intervals.
4 FS 109