Publicité
Les langues disponibles
Les langues disponibles
LEVIGABORDI – EDGE SANDER – PONCEAUSE -
circuit is present or if the circuit is thought to be inadequately earthed.
Danger:
Using the machine with a damaged mains lead may result in electric shock. Do
not use the machine if the mains lead is damaged. Do not pull the machine by
the mains lead.
Danger:
Injury may result if the sander passes over the mains lead. Keep the mains lead
away from the lower part of the machine to avoid contact with the abrasive.
Always keep the mains lead above the machine.
Danger:
Moving parts may cause damage and/or serious injury. Keep hands, feet and
loose clothing away from all moving parts of the sander.
Warning:
Failure to follow all the instructions contained in this handbook may result in
serious injury and/or damage. Read and observe all safety instructions. Check
that all information plates, warning/caution labels and instructions are present
on the machine. For new plates contact your authorised K&T dealer.
Caution :
Maintenance and repairs carried out by unauthorised persons may result in
damage and/or personal injury.
Caution :
Storing the machine in a damp environment will result in damage.
INSTRUCTIONS FOR CORRECT USE
The appliance is suitable for commercial use, for example in hotels, schools, hospitals, offices,
homes and shops.
The information that follow highlight potentially hazardous conditions for the user and/or the
machine itself. Read the handbook carefully to get to know the machine and recognise when
such conditions may arise. Use all safety systems provided on the machine. Personnel must be
trained before using the machine. Immediately report any damage to the machine or incorrect
operation.
1. Keep hands and clothing away from moving parts.
2. Keep hands on the handle while the motor is running.
3. Do not leave the machine unattended with the motor running.
4. Do not operate the machine with the motor base upside down.
5. Always use the machine with the accessories fitted in the correct position.
6. Always disconnect the machine from mains supply before carrying out maintenance.
7. Given the weight of individual machine components, always use caution during
transport.
8. Use the machine only in well ventilated areas.
9. Always dispose of sawdust correctly.
10. Always use the sanding disks provided with the machine or of the type specified in the
handbook.
11. Start the machine only with the sanding disks correctly mounted and stop the motor if
they are not in perfect working condition.
INCORRECT USE
Caution:
Using the machine to push other objects or on an incline may result in damage
and/or personal injury. Do not ride the machine.
Caution:
If the machine remains stationary in one point with the disk running will result in
serious damage to the floor being sanded. To prevent damage to the floor
always approach the stopping point gently. Do not pause when raising or
lowering the roller, but always advance at a constant speed.
MANUALE DI ISTRUZIONE – USE AND MAINTENANCE HANDBOOK – MANUEL POUR L'EMPLOI - BEDIENUNGSAINLEITUNG
BLIZZARD
INSTRUCTIONS FOR USE
BORDERSHLAUFMACHINE
ED.07
Pag. 18/40
Publicité
Chapitres
