Removing And Replacing The Cover; Care And Maintenance - Axkid Mate ECE R44/04 Manuel D'instructions

Removing And Replacing The Cover

WARNING: The cover is a safety feature.
Never use the child car seat without it.
Starting at the rear of the seat, pull the polyester cover over the
5
plastic shell of the seat. Carefully pull the cover down towards the
front of the seat ensuring the cover material does not rip or tear.
To replace: feed the cover over the armrests then pull the cover over the
seat.

Care And Maintenance

The seat cover is removable and should be hand washed at 30º C.
Do not put the cover in a dryer as this can damage the cover and
the padding may separate from the fabric. See the seat cover for full
instructions.
Any plastic parts of Mate can be cleaned with mild detergent and
water. Do not use aggressive chemicals containing solvents etc, as
this can cause damage to the plastic and compromise the safety of
the child restraint.
All materials used in the Mate child restraint are recyclable and should
be recycled as per your local legislation. Ask your local recycling
centre for advice when recycling this product.
Do not make any modifications or alterations to the Mate child
restraint other than those described in this instruction manual. Follow
the instructions in this manual carefully. Any repairs must be carried
out by the manufacturer or agent.
9