Axkid Mate ECE R44/04 Manuel D'instructions page 3

Instruction Manual
Important Information
Read this instruction manual before installing the Mate child restraint in your
vehicle.
Thank you for choosing an Axkid child seat. Our team has over 30 years
combined experience within child safety, and we have done our utmost
to make the Mate child seat as safe as possible. The Mate child restraint is
approved according to ECE R44/04, the latest European standards for child
safety. To maximise your child' s safety it is important that you keep the following
in mind;
Read this instruction manual carefully before installing the Mate child
restraint. If in doubt, contact your retailer who can demonstrate a correct
installation. An incorrect installation could endanger your child.
Do not use a child restraint in a seating position where an active airbag
is fitted. If you still wish to install the Mate in this location the airbag must
be disconnected at an authorised service centre. Some vehicles may be
equipped with a switch which allows you to manually switch the airbag
off. It is important to always check if the vehicle' s indicator light shows
that the airbag is turned off.
DO NOT use anything such as a cushion or coat to raise the booster seat
off the passenger seat. In the event of an accident, the booster seat and
the vehicle seat belts will not be able to protect your child as well as they
should.
V6
Mate
Forward-facing 15-36 kg with vehicle seat belt
3
EN