Do Not Disturb: Enabling/Disabling - Selta SAEfon CL Serie Instructions D'utilisation

or
- if customized, press [Fixed_forward_1] or [FORWARD]
function key: the LED associated to the key lights red;
service is enabled when you hear a tone of confirmation.
If the telephone is enabled to the "Director functions", a second
destination of "fixed forward" is possible only if, in the telephone
profile, a function key is configured as [Fixed_forward_2]
[FORW_DIR_SEC]; to activate it:
- press the key configured as [Fixed_forward_2] or
[FORW_DIR_SEC]: the LED associated to the key lights
red; service is enabled when you hear a tone of
confirmation.
To cancel the forward from your telephone, first lift the handset or
activate the hands-free service, then:
- dial the "deactivate variable/fixed call forwarding" prefix
signalled by a tone of confirmation. If your telephone has a
programmed function key, the service of fixed forwarding
can be cancelled by pressing again the same key, the LED
associated to the key turns off.

10.9. Do not Disturb: enabling/disabling

You do not want to receive calls from internal extensions and possible
from external calls.
To enable the service:
- lift the handset
- dial the "do not disturb activation" prefix
customized, press the [DO NOT DISTURB] key: the LED
associated to the key is steady red.
To disable the service:
- lift the handset
68
; cancellation of forwarding call is
and wait for a tone of confirmation or, if
SAEfon CL - Operating instruction
or