Telephone Display In Idle; Outgoing Calls Display; Incoming Calls Display - Selta SAEfon CL Serie Instructions D'utilisation

Passive telephone
The telephone is passive when has the led of a line associated to the
key (supervision) and any operation cannot be executed on this line.
It can only show the status of the line associated to the key (for
instance the led turns steady red, it means that the line is busy).

7.2. Telephone display in idle

When the telephone is in idle:
- the first row of the display shows hour and date
- the second row shows your extension number, your user
name if customized and your class of service.

7.3. Outgoing calls display

During dialling to make a call, the first row on display shows the
dialled number and the second row is empty:
- if you dialled an extension, the first row keeps on showing the
dialled number, when it answers, while the second row
shows the number of the extension that has answered the
call;
- if you dialled a public network number, the first row keeps on
showing the dialled number and you can see also the
duration of the call, when it answers.

7.4. Incoming calls display

During an incoming call:
- if the call comes from an extension, the display shows on the
second row the number of the caller with the user name, if
customized
- if the call comes from the incoming trunk line, the display
shows the number of the trunk line caller and the name,
if customized (in the table of the speed numbers or the local
telephone book).
If the extension is in conversation and a new call arrives, or he is
free and more than a call arrives, it is possible to know the caller
identifier which is not shown, if the "Caller ID" key has been
customized:
56 SAEfon CL - Operating instruction