Roco multiZENTRALEPRO Manuel page 61

Example: You wish to drive a locomotive (travel direction left) to branch off at turnout no. 24.
Input
Press the "Locomotive /turnout" key again to return to drive mode (library or locomotive address mode).
Three useful multiMAUS
Toggle mode
You can switch between the current turnout and the turnout last called up by pressing the "Light /OK" key. This
provides you with quick access to two sets of turnouts which, for instance, are next to each other on a stretch
of track.
Address scrolling
Press the "shift" key and one of the "arrow keys" at the same time and the multiMAUS
the turnout addresses.
Turnout short-cut keys
For quick access you can store the 10 most frequently used turnouts as a short-cut function on the "function
keys". To do so, proceed as in the following example:
Turnout 5 and 14 are to be made available for activation using "function keys" 1 and 2. First call up turnout
▪
5 as usual in turnout mode. Press the "MENU" key and "function key" 1 together and confirm with the
"Light /OK" key.
Then call up turnout 14. Press the „MENU" key and "function key 2" together again and confirm with the
▪
"Light /OK" key.
You can now call up these two sets of turnouts at any time by pressing the "shift" key and the respective
▪
"function key". You can switch the turnouts by using the depressed "switch" key together with the respective
"function key".
In the factory setting, the turnouts 1 –10 are set to the "function keys" with the same numbers (turnout 10 =
"function key" 0). You can overwrite this saved order.
Display message Comment
After the "Locomotive /turnout" key has been
pressed, the multiMAUS
mode (library or locomotive address mode) to turn-
out mode.
The turnout last called up always appear. In this case,
turnout "6", position "straight-on."
The flashing cursor indicates that the turnout address
can be entered. You enter the address "24" using the
"function keys" "2" and "4."
If the turnout has not yet been switched, the com-
plete turnout symbol appears in the display.
Press the right "arrow key" to switch the turnout. You
may hear an acoustic confirmation depending on the
turnout drive in use. The vacant digits between "T"
and the address "24" are filled with a "0."
Note: Pressing the key for a long time may damage
or destroy older turnouts which do not have a cut-off.
aids for the turnout mode
PRO
PRO switches from drive
will scroll through all
PRO
61