Mounting Instructions - Bosch CCS 800 Mode D'emploi

9.2

Mounting Instructions

The CPSU can be attached in three
different ways:
•
In a 19" rack making use of the 19"
rack mounting set LBB 3311/00.
Place a blank 1HU panel above the
CPSU to have sufficient space for
cable connections.
•
Mounted into a table (see Fig. 4)
using the flush mount bracket
illustrated on page 21.
•
On a table. Therefor drill four holes
in the table according to Fig. 6 and
fasten the CPSU with four M3 screws.
The delegate and chairman units can
only be attached on a table. Therefor
drill two holes in the table according to
Fig. 5 and fasten the unit with two M3
screws.
Fig. 6
Fig. 4
Fig. 5
342.5
20
Ø3.5 (2x)
34