Technical Data - Bosch LW 20/30 E Mode D'emploi

Technical data

Dimensions L x W x H:
300 x 390 x 207 mm
Weight:
Rated mains voltage:
Rated mains frequency:
Mains connection cable with inlet
connector for non-heating appara-
tus 1.5 m long
Rated battery voltage:
Charging leads
2.0 m long, PVC insulation
F The charging leads must not
be changed!
Insulated charging clips:
Positive (+) = Red
Negative (–) = Black
Mains fuse: H250 slow-blow 4 A
Thermostatic switch and thermal
release in power transformer
Ammeter
LED displays:
Green: Battery charged (approx.
Yellow: Charging operation
Red:
17 kg
Degree of protection(DIN 40050):
230/240 V
50 Hz
Safety class (DIN 40530):
RFI suppression
EMC interference emission level:
12/24 V
Level I to DIN 40839
Level 3 to VDE 0843, Part 2
2
6 mm
Level 2 to VDE 0843, Part 4
Charging
reducible):
Final charging voltages:
Standard batteries
Maintenance-free batteries
0...20 A
arithm.
English
60% of rated capacity)
Fault indication
IP 20
to VDE 0875
(IEC 801–2)
(IEC 801–4)
current (continuously
approx. 1...20 A
arithm.
14.4 V or 28.8 V
13.8 V or 27.6 V
Charging characteristic:
12 V-operation
24 V-operation
Mains input current:
Power consumption: approx. 640 W
Switch-on prevention
in the event of short-circuit or incor-
rect polarity
I
Minimum battery voltage:
Normal charging
For charging
exhausted batteries
The terminal voltage is automati-
cally switched off if the charging
clips are disconnected from the bat-
tery.
Radio interference sup-
pression
It is hereby certified that the charger
LW 20/30 E is radio-interference-
suppressed in accordance with the
regulations of the German PTT Offi-
cial Gazette Ordinance 1044/1984.
15
IU
IWU
max. 4.5 A
7.5 V or 15.0 V
0.5 V