Lubrication - Rupes HR81M Mode D'emploi

Displayed emission values are comparative and are to be employed for a provisional assessment of the
operator's risk exposure during the work period. Appropriate evaluation of work period must also include tool's
idle and stop periods. These emission values represent the tool's main applications. If the tool is used for
other applications, with other accessories, or if it does not undergo regular maintenance, emission values can
signifi cantly increase during operations.
DANGER: The indicated measurements refer to new power tools. Daily usage causes the noise and
vibration values to change.
MAINTENANCE AND SERVICING
WARNING: To reduce the risk of injury, turn unit off and disconnect it from power source (when
machine is connected to a power supply) or battery pack (when machine is connected to a
battery pack) before installing and removing accessories, before adjusting or when making
repairs. Be sure the switch is in the "OFF" position. An accidental start-up can cause injury.
CLEANING
At the end of each work session, or when required, remove any dust from the body of the tool using a soft cloth,
paying particular attention to the motor ventilation slots. No other maintenance operations must be undertaken
by the user.

LUBRICATION

This tool has been lubricated with a suffi cient amount of high grade lubricant for the life of the unit under normal
operating conditions. No further lubrication is necessary.
REPAIRS
Maintenance and cleaning of the inner parts like ball bearings, gears etc. or others, must be carried out only by
an authorized customer service workshop.
DISPOSAL (WEEE DIRECTIVE)
FOR EC COUNTRIES ONLY: According to the European Directive on Waste from electrical and
electronic equipment and its implementation in conformity with national standards, exhausted electrical
equipment must be collected separately, in order to be recycled in an environmentally friendly way. The
product, when it reaches the end of its life, must not be dispersed in the environment or thrown away
as household waste. It must be disposed at authorized recycling centres (contact your local authorities
to know where to dispose of the product according to the law). The correct disposal of the product
contributes to the health and preservation of the environment. Illegal disposal of the product will entail
penalties against the offenders.
Rupes BIGFOOT NANO Hybrid tool Part Numbers:
HR81M - short neck Rupes BIGFOOT NANO Hybrid tool
HR81ML - long neck Rupes BIGFOOT NANO Hybrid tool
9HC120LT - Li-ION Battery Charger
9HB120LT - Li-ION Battery pack
9HP120LT - Rupes BIGFOOT NANO Hybrid tool Power Supply
11 11