Safety Notes - IMG STAGELINE VU-800PRO Mode D'emploi

VU Meter
These instructions are intended for users with basic knowl-
edge of audio technology . Please read these instructions care-
fully prior to operation and keep them for later reference . All
operating elements and connections de scribed can be found
on the fold-out page 3 .
1 Overview
1 Trimming controls for sensitivity adjustment of the left and
the right channels
2 Selector switch for the display mode of the LEDs (3):
BAR = bargraph display, DOT = dot display
3 LED level display; indicating the level for the left channel
(upper row) and the right channel (lower row) in dB
4 Power switch
5 Low voltage jack for connecting the power supply unit pro-
vided
6 Stereo input AUDIO IN for connecting the output of the
signal source whose level is to be indicated (e . g . mixer, ef-
fect unit)
7 Stereo feed-through output AUDIO OUT for connecting the
input of a subsequent device (e . g . amplifier, second mixer,
tape recorder)

2 Safety Notes

The product corresponds to all relevant directives of the EU
and is therefore marked with
The product corresponds to the relevant UK legislation and is
therefore marked with UKCA .
WARNING The power supply unit uses dangerous mains
voltage . Leave servicing to skilled personnel
only . Inexpert handling may result in electric
shock .
•
The product is suitable for indoor use only . Protect it against
dripping water, splash water and high air humidity . The ad-
missible ambient temperature range is 0 – 40 °C .
•
Do not place any vessels filled with liquid, e . g . drinking
glasses, on the product .
•
Do not use the product and immediately disconnect the
power supply unit from the mains socket:
1 . if there is visible damage to the VU meter or to the power
supply unit .
2 . if a defect might have occurred after a device was
dropped or suffered a similar accident .
3 . if malfunctions occur .
Any repairs must be carried out by specialists .
.
7