General Information; Description Of The Symbols Used; Field Of Application; Instructions And Technical Norms - CHAFFOTEAUX 150 L Notice D'emploi Et D'installation

1.1 Description of the symbols used

In terms of installation and operation safety, the symbols described in the table below are used in order to stress the
importance of the relative risk warnings:
Symbol Description
Failure to comply with this warning may result in injury to persons or, in some cases, death.
Failure to comply with this warning may result in serious damage to property and plants or injury to
animals.
It is mandatory to comply with the general and appliance-specific safety measures.

1.2 Field of application

This appliance is intended for hot water production for domestic use or similar, at temperatures below boiling point.
The appliance must be hydraulically connected to a domestic water supply line and to a power supply network.
Exhaust ducts may be used for the entry and discharge of processed air.
It is forbidden to use of the appliance for uses other than those specified. Any alternative use of the appliance
constitutes improper use and is prohibited; in particular, the appliance may not be used in industrial cycles and/or
installed in environments exposed to corrosive or explosive materials. The manufacturer shall not be held liable for
any damage due to faulty installation, improper use or uses deriving from behaviour that is are not reasonably
predictable, and incomplete or careless implementation of the instructions contained in this manual.
This appliance should not be operated by individuals (including children) with reduced physical or
sensory abilities, or by inexperienced or unskilled individuals, unless adequately supervised and trained
regarding use of the appliance by persons responsible for their own safety. Children must be
supervised by persons responsible for their safety so as to ensure that they do not use the appliance as
a toy.

1.3 Instructions and technical norms

The purchaser pays for the appliance's installation, which must be carried out by qualified personnel only, in
conformity with national regulations in force and any provisions emitted by local authorities or bodies responsible for
public health, and in accordance with the specific manufacturer indications contained in this manual.
The manufacturer is responsible for the product's conformity to the relevant construction directives, laws and
regulations in force at the time the product is first commercialised. The designer, installer and user are each
exclusively responsible, in their respective fields, for knowing and observing the legal requirements and technical
regulations concerning the design, installation, operation and maintenance of the appliance. Any reference to laws,
regulations or technical specifications contained in this manual is purely for information purposes; any new laws
introduced or modifications to existing laws are not in any way binding on the manufacturer towards third parties. It is
necessary to ensure that the power supply network to which the product is connected complies with the EN 50160
norm (under penalty of warranty invalidation). Relative to France, ensure that installation complies with the NFC 15-
100 norm.
The tampering of product integral parts and/or supplied accessories invalidates the warranty.
Heat pump water heater – GENERAL INFORMATION

GENERAL INFORMATION

33