Wiring Requirements - Gree GMV-N22G/A3A-K Manuel D'utilisation

Material type
Light/Ordinary
polyvinyl
chloride
sheathed cord.
(60227 IEC 52
/60227 IEC 53)
3.3.2 Select communication line for indoor unit and indoor unit (outdoor unit)
Total Length L (m/feet)
of Communication
Material Type Cable between Indoor
Light/Ordinary
polyvinyl
chloride
sheathed cord. (L≤3280-5/6feet)
(60227 IEC 52
/60227 IEC 53)

3.4 Wiring Requirements

Model
GMV-N22G/A3A-K, GMV-N22G/A2A-K
GMV-N22G/A4A-K, GMV-N22G/A8A-K
GMV-N22G/C9A-K, GMV-N22G/E3A-K
GMV-N28G/A3A-K, GMV-N28G/A2A-K
GMV-N28G/A4A-K, GMV-N28G/A8A-K
GMV-N28G/C9A-K, GMV-N28G/E3A-K
GMV-N36G/A3A-K, GMV-N36G/A2A-K
GMV-N36G/A4A-K, GMV-N36G/A8A-K
GMV-N36G/C9A-K, GMV-N36G/E3A-K
GMV-N45G/A3A-K, GMV-N45G/A2A-K
GMV-N45G/A4A-K, GMV-N45G/A8A-K
GMV-N45G/C9A-K, GMV-N45G/E3A-K
GMV-N50G/A3A-K, GMV-N50G/A2A-K
GMV-N50G/A4A-K, GMV-N50G/A8A-K
GMV-N50G/C9A-K, GMV-N50G/E3A-K
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Wall Mounted Type Indoor Unit
Total length of
communication line
between indoor unit and
wired controller L (m/feet)
L≤250m
(2×AWG18~2×AW
(L≤820-1/5feet)
Wire size
(mm
Unit and Indoor
(Outdoor) Unit
L≤1000m
≥2×0.75
(≥2×AWG18)
Power Cord Size
220-240V ~ 50Hz
220-240V
220-240V ~ 50Hz
220-240V ~ 50Hz
220-240V ~ 50Hz
Wire size Material
2
(mm /AWG)
Standard
2×0.75~2×1.25 IEC
60227-5:200
G16)
7
Fig 3.3.2
Material
2
/AWG) Standard
IEC
60227-5:2007
Air Switch
apacity
(A)
6
~
6
50Hz
6
6
6
5
Remarks
1.Total length of communication line
can't exceed 250m (820-1/5feet).
2.The cord shall be Circular cord (the
cores shall be twisted together).
3.If unit is installed in places with intense
magnetic field or strong interference, it is
necessary to use shielded wire.
Remarks
1. If the wire diameter is enlarged to 2×1
2
mm (2×AWG16), the total
communication line length can reach
1500 m (4921-1/4feet).
2. The cord shall be Circular cord (the
cores shall be twisted together).
3. If unit is installed in places with
intense magnetic field or strong
interference, it is necessary to use
shielded wire.
Minimum Sectional Minimum Sectional
Area of Area of Power
2
Ground Wire(mm ) Cord(mm
1
1
1
1
1
2
)
1
1
1
1
1