Environmental Protection; Declaration Of Conformity - Worx AXIS WX550 Mode D'emploi

TROUBLESHOOTING
Possible
Symptom
Causes
The tool Over load
suddenly Battery
stops during temperature
operation. too high
Low battery
capacity
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
20V Li-Ion multi-purpose saw
DECLARATION OF
CONFORMITY
Possible
We,
Solution
POSITEC Germany GmbH
Relieve the
Konrad-Adenauer-Ufer 37
load on the
50668 Köln
machine
immediately
Declare that the product,
and allow
Description WORX Li-ion Multi-Purpose Saw
cooling for Type WX550 WX550.1 WX550.9 (5-designation
approx. 30
of machinery, representative of Saw)
seconds by Function Sawing various materials
running the
machine on
Complies with the following Directives,
no-load.
2006/42/EC
2011/65/EU
Charge the
2014/30/EU
battery pack.
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-11
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd, PO
Box 6242, Newbury, RG14 9LT, UK
Suzhou 2016/09/16
Allen Ding
Deputy Chief Engineer,Testing & Certification
11
EN