12 jug
13 coffee spon (corresponds to approx. 7 g)
Disassembly of grinding/brewing container with filter and lid
Press the button on the side of the lid of grinding/brewing container to lift the lid and to
remove it. On the backside of the lid is a round filterinsert which can be removed. Turn the
container anti-clockwise and lift it up. The filter (3) can be lifted by pulling at its handle (3a).
Please note
► Please remove the jug before disassembly, otherwise coffee ground may infiltrate the
jug.
Assembly of grinding/brewing container with filter and lid
Replace the round filterinsert on back of lid of grinding/brewing basket.
Place the grinding/brewing container oblique, press down and turn it clockwise (12) until
the container latches.
Take the filter at its handle (A) and place it a position B into the grinding/brewing container.
Place the lid of grinding/brewing container with steamoutlett to the backside and press it
down, observe that the water tube C is placed into the water inlet D.
45