Instructions For Use - Sony CCMA-2DAR Instructions D'utilisation

Specifications
General
Power requirements
3 V DC (two size AA (R6, LR6) batteries)
Power consumption
0.03 W (Motor: No load current × rated voltage)
Operating conditions
Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 20% to 80% (no condensation
allowed)
Pressure 700 hPa to 1,060 hPa
Storage and transport conditions
Temperature –20 °C to +60 °C
(–4 °F to +140 °F)
Humidity 20% to 80% (no condensation
allowed)
Pressure 700 hPa to 1,060 hPa
External dimensions
Main unit: 70 mm × 34 mm × 74.5 mm
7 3
(2 / in × 1 / in × 3 in)
8 8
(excluding protrusions)
Controller: 69 mm × 28 mm × 115 mm
3 1
(2 / in × 1 / in × 4
4 8
(excluding cable)
Cable: ø5.9 mm × 4 m (ø
Mass
Main unit: 430 g (15.2 oz)
Controller: 250 g (8.8 oz) (excluding batteries)
Lens mount
C mount
Focal length
40 mm
Aperture opening (F-stops)
2.8 to 8
Supplied accessories
M38 adapter attachment (1)
Camera connector cap (1)
Microscope connector cap (1)

Instructions for Use (1)

Warranty (1)
Service Contact List (1)
Information for Customers in Europe (1)
Design and specifications are subject to change
without notice.
5
/ in)
8
1
/ in × 13.1 ft)
4
Notes
• Always verify that the unit is operating
properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY
KIND MADE BY USERS OF THIS UNIT OR MADE
BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF ANY
SERVICES RELATED TO THIS UNIT THAT MAY
RESULT DUE TO CIRCUMSTANCES OF ANY
KIND.
9
GB
Specifications