Instructions For Use - Sony BKM-250TGM Instructions D'utilisation

SD-SDI: Y/Cb/Cr
13.5 MHz/6.75 MHz/
6.75 MHz
Quantization
3G-SDI: 10 bits/sample, 12 bits/
sample
HD-SDI: 10 bits/sample
SD-SDI: 10 bits/sample
OUT connector (monitor out)
Output signal amplitude:
800 mVp-p ±10%
Output impedance: 75Ω
unbalanced
Transmission distance
3G-SDI: 70 m (approx. 230 ft)
max. (When using 5C-FB
coaxial cables (Fujikura. Inc.)
or equivalent.)
HD-SDI: 100 m (approx. 328 ft)
max. (When using 5C-FB
coaxial cables (Fujikura. Inc.)
or equivalent.)
SD-SDI: 200 m (approx. 656 ft)
max. (When using 5C-2V
coaxial cables (Fujikura. Inc.)
or equivalent.)
Note
Not available for analog signal.
Supplied accessories

Instructions for Use (1)

Information for Customers in
Europe (1)
Design and specifications are subject to change
without notice.
Notes
• Always verify that the unit is operating
properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR
CLAIMS OF ANY KIND MADE BY
USERS OF THIS UNIT OR MADE BY
THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR
DISCONTINUATION OF ANY
SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
5
GB
Specifications