Alarm Options - Tivoli Audio MUSIC SYSTEM THREE+ Manuel Du Propriétaire

4. Use the pq buttons to set/change the hour, then press Select. Repeat this process to set/
change the minutes, followed by AM/PM (if time is set to 12 hour format), then press Select.
5. Use the pq buttons to select the source you wish to wake to, then press Select. If
you set the source to DAB (includes DAB+) or FM, use the pq buttons to select the
station preset (if presets have been stored) or last listened, then press Select.
6. Use the pq buttons to set how often the alarm should be set to wake, then press Select.
7. Lastly, use the pq buttons to set the volume level of the alarm, then press Select.
Also, if enabled, the "Volume Limit" feature under the Auxiliary Menu will affect the
alarm volume.
8. Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote and
begin again.
Note: Your settings will not be saved unless you complete the entire process and the
display shows "Alarm Saved".
Note: If you set the alarm source to DAB and the last listened or preset station is unavail-
able at the time the alarm sounds, the alarm will default to the tone.
Power Loss: Should power be lost, or the Music System Three+ becomes discon-
nected, the alarm time will be saved but the Music System Three+ alarm cannot
sound if there is no power.

Alarm Options

The alarm sounds with a gradual volume increase. When the alarm sounds you can acti-
vate the Snooze feature or shut the alarm off.
Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the
remote, or briefly press the Multi-Function Control Wheel on top of the unit. The Snooze time
is not adjustable. Pressing the Snooze button again while still in Snooze mode will re-set
the Snooze timer back to 10 minutes. While the alarm is sounding, press and hold down the
Snooze top wheel to turn off the alarm and the unit, or press the respective alarm button.
Alarm off: To stop the alarm while it is sounding, press the Alarm button on the unit or
remote, or press and hold the Multi-Function Control Wheel on top of the unit. You can
also press the Power button on the remote.
Alarm Quick Set: With the Music System Three+ in Standby, repeatedly press the alarm
button on the remote briefly to toggle each alarm on or off.
IMPORTANT NOTES:
• The alarm cannot sound if the Music System Three+ is off and not connected to the
external adapter.
• The alarm volume will ramp-up over time. It will take several seconds until the alarm
reaches the volume level set in the alarm menu.
• Should power be lost or the battery becomes discharged, the alarm time will be
saved, but the alarm cannot sound without power to the Music System Three+.
14 – ENGLISH