How To Set Alarm - Tivoli Audio MUSIC SYSTEM THREE+ Manuel Du Propriétaire

Note: The Main Menu will time out if no action is taken after nine seconds.
1. SCAN SETTING: Press the Select button and use pq and Select button to choose
between "Strong stations only" or "All stations" when performing an auto scan
(see #9 (pq/Tune +/-) under "Remote Control". Selecting "All stations" increases
the sensitivity of the scan, possibly resulting in the auto seek stopping on noise.
2. AUTO SCAN (NOT IN AUX MENU): Press the Select button and use pq and Select
buttons to enable or disable Auto Scan. When enabled, Auto Scan will automatically
tune the next station received each time the Tune +/- buttons are pressed. When
disabled, the Tune +/- buttons can be used to manually navigate the frequencies.
3. RDS: Press the Select button and use the pqand Select buttons to choose
between Enabling or Disabling FM RDS text. For more, see "RDS".
4. TIVOLI EQ: See the description under "Digital Radio Menu".
5. SETTINGS: See the description under "Digital Radio Menu".
Auxiliary Menu
In Auxiliary mode, press and hold the Menu/Select button on the remote to enter the main
menu. Use the pq buttons and the Select button to change the items within the menu.
Use the Back button to navigate back. An asterisk (*) indicates the shown menu item is
currently set.
Note: The Main Menu will time out if no action is taken after nine seconds.
1. TIVOLI EQ: See the description under "Digital Radio Menu".
2. ALARM 2: If you do not expect to use Alarm 2 or are afraid Alarm 2 may be set in
error, press the Select button and use the pq and Select buttons to Disable Alarm 2.
3. SETTINGS: See the description under "Digital Radio Menu".
4. VOLUME LIMIT: If you wish to reduce the maximum volume level so as not to disturb
others, press the Select button and use the pq and Select buttons to choose between
Volume limit 26 or 22. Selecting "Off" keeps the maximum volume at the factory default
setting of 30. Note reducing the overall volume level will also reduce the level of the
alarm's volume when the alarm sounds.
5. BLUETOOTH LEVEL: Use the pq and Select buttons to select "Low" should
you wish to reduce the range of the Bluetooth signal. This may be desirable if the
Bluetooth feature will only be used when you are in very close proximity to the radio.
We recommend this setting remain in the "Normal" position.
How to Change Alarm Settings and Set the Alarm Via
the Main Menu
1. With the Music System Three+ powered on, access the alarm setting through the
main menu in DAB, FM, or Aux modes by pressing the alarm button on the remote,
or by pressing and holding the Menu button on the remote. Once in the Menu, select
"Settings" and "Alarm".
2. Alarm 1 is shown first. Use the pq and Select buttons to choose between Alarm 1
and Alarm 2. Note: At any point you can navigate through the alarm menu by using the
back or left arrow buttons, and the Select or right arrow buttons.
3. Use the pq and Select buttons to set the alarm on or off.
13 – ENGLISH