Remote Control - Tivoli Audio MUSIC SYSTEM THREE+ Manuel Du Propriétaire

Guide to Features (Remote Control)
1. POWER: Press briefly to power
the Music System Three+ off or
on. The radio will power on to
the last source used.
2. MUTE/SNOOZE: Press to mute
the audio while the unit is play-
ing; press again or adjust the
volume to restore sound. Press
to mute the alarm for 10 min-
utes after the alarm sounds. A
icon will show on the dis-
play when Snooze is active. The
Snooze time is not adjustable.
Pressing the Snooze button
again while still in Snooze mode
will re-set the Snooze timer
back to 10 minutes.
3. ALARM: With the Music
System Three+
on, use the pq and Select
buttons to adjust and set the
alarms. Please also see "How to Change Alarm Settings and Set the Alarm Via
the Main Menu" for additional very important Alarm settings.
4. SLEEP: Press repeatedly to activate the amount of time the radio will play before it
turns off automatically, and or press the Select button on the remote control to select
that time. A small clock face
To cancel Sleep, press the Sleep button until the display shows "Off".
5. SOURCE: Press repeatedly to change sources.
6. INFO: Press repeatedly to cycle through the information available depending on the
source mode you are in.
7. PRESETS 1-5: Press and hold to store the currently tuned station. Press briefly to
recall the station associated with that specific preset. In FM mode, the preset number
will be indicated on the display. There are 5 presets for each band.
8. VOLUME +/–: Press the Volume + button to raise the volume level or the Volume –
button to lower the volume level. If the audio ever sounds distorted, lower the volume
level to avoid damaging the speaker. Adjusting the volume while the Music System
Three+ is muted will cancel the muting.
9. pq/TUNE +/-: Press to adjust menu items when in the Menu. In DAB mode, use these
buttons to show all available DAB/DAB+ stations. Use the pq buttons to highlight
specific stations and the highlighted DAB station will tune automatically after 3 seconds,
or press the Enter button on the remote control. FM: Press the Tune +/- buttons briefly
to Auto Scan to the next station detected. See "Auto Scan" under "FM Menu" on how
to disable Auto Scan and tune stations manually.
10. t u: The right arrow button duplicates the Select button. The left arrow button moves
you to the previous page in certain menu items.
10 – ENGLISH
4
2
3
11
13
8
powered
will show on the display when the Sleep timer is active.
5
1
6
7
9
12
10