Backlight; Factory Reset - Tivoli Audio MUSIC SYSTEM THREE+ Manuel Du Propriétaire

B. TIME:
Set Time/Date: Press the Select button and use pq and Select buttons to adjust
the hour and then minutes. You must also set the Auto update to "No update". For
more, refer to "Auto update" below.
Auto Update: Press the Select button and use pq and Select buttons to choose
between "Update from any", "Update from DAB", or "Update from FM" (RDS). For
any of the auto updates to work, you must have consistent reception of DAB or FM
RDS with a time/date signal provided. It could take up to a minute or more for the
clock to update. Tivoli Audio is not responsible for inaccurate time/date information
provided by the auto update signal. To set the clock manually, select "No Update",
and then select "Set Time/Date" under the "Time" menu using the pq buttons
and the Select button to set the hour. Repeat to set the minutes and press Select
to save.
Set 12/24 Hour: Press the Select button and use the pq and Select buttons to
choose 12 or 24 hour clock format.
Set Date Format: Press the Select button and use the pq and Select buttons to
choose the date format you prefer.
C. BACKLIGHT:
Timeout: The backlight level can be constant regardless of whether you are us-
ing any controls on the Music System Three+ or not (this is the way the Music
System Three+ is configured from the factory), or you can customize the backlight
to automatically change to a "Dim level" setting after a fixed period of time for as
long as no controls are being used. Once a control on the unit or the remote is
pressed, the normal backlight level is restored. Press Select and use the pq and
the Select buttons to set the amount of time it will take for the backlight to change
to the dim level from 10, 20 ,30, 45, 60, 90, 120, or 180 seconds, or to keep the
timeout feature Off.
On Level: Press Select and use the pq and Select buttons to choose the inten-
sity of the backlight.
Dim Level: If you selected a time for the backlight to change to a dim setting un-
der "Timeout", then press Select and use the pq and Select buttons to choose
the intensity of the backlight when it changes to this dim setting.
D. LANGUAGE: Press Select and use the pq and Select buttons to set your lan-
guage.
E. FACTORY RESET: Press Select and use the pq and Select buttons to confirm
(Yes) or reject (No) the factory reset. A factory reset will restore factory defaults and
cancel all your personal settings such as presets and language. The factory reset
may not be accessible when operating on battery-only power. Also see the section
marked "Digital Radio/FM Reception".
ID: Press Select to view the ID. If you contact your dealer or Tivoli Audio with a
F.
question, you may be asked to provide the number shown in this field.
FM Menu
In FM mode, press and hold the Menu/Select button on the remote to enter the main
menu. Use the pq buttons and the Select button to change the items within the menu.
Use the Back button to navigate back. An asterisk (*) indicates the shown menu item is
currently set.
12 – ENGLISH