Boiling Water; Cleaning And Maintenance - Redmond SkyKettle RK-M170S-E Mode D'emploi

Masquer les pouces Voir aussi pour SkyKettle RK-M170S-E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Water-temperature maintenance mode
This mode switches on automatically after heating and allows a set water temperature
to be maintained (40, 55, 70, 85 or 95°С) for 12 hours. If the water falls below the set
temperature, the heating element switches on automatically. The water is not reboiled.
At the end of the process, the appliance emits 5 short signals and switches to standby.

Boiling water

1. In the standby mode, press 100°C. The indicator lights up.
2. If you want to keep the water at a set temperature after boiling, press the relevant
temperature button (40, 55, 70, 85 or 95°С). The indicator lights up.
The temperature can be set or changed in the same way during or after boiling.
3. Press
and wait about 3 seconds: the
starts to heat up.
4. When the water has boiled, depending on the settings:
• the kettle switches back into the standby mode (no indicator light);
• the kettle switches into the temperature-maintenance mode (the
perature indicators light up).
5. Press
to interrupt the heating process or switch off the automatic temperature-
maintenance mode.
Heating water without boiling
This is the recommended mode for bottled artisan or filtered water. Water which has
not been boiled retains its natural properties, which is particularly important when
brewing premium teas.
1. In the standby mode, press
. The indicator lights up.
2. Within 5 seconds, press the temperature button to set the water temperature (40,
55, 70, 85 or 95°С). The indicator lights up.
If the temperature is not set within 5 seconds, the appliance switches to the standby
mode (no indicator light). The temperature can also be changed during the heating
process by pressing the relevant temperature button.
3. Press
or wait 5 seconds: the
indicator lights up and the water starts heating
up. At the same time, the
,
and temperature indicators will light up.
4. When the water has been heated, the kettle goes into the temperature-mainte-
nance mode (the
and temperature indicators light up).
Boil Dry Protection
The kettle switches off automatically after boiling and when it is removed from its base.
If the kettle is empty or does not have enough water inside, the dry-boil protection will
switch the kettle off automatically. When it has cooled down, the appliance will again
be ready for use.
The Ready for Sky technology
The Ready for Sky technology enables to use the software app of the same name to
control the appliance remotely from a smartphone or tablet.
1. Download the software from the App Store or Google Play (depending on your
indicator lights up and the water
2. Switch on Bluetooth v4.0 on your mobile device.
3. Open the Ready for Sky app, create an account and follow the prompts that appear
and tem-
4. Open and update the list of available appliances to connect to the mobile device.
5. From the list of available appliances select the one to be connected. The name
6. Confirm the connection of the selected appliance and follow the instructions on
Appliance control via the wireless network. Instruction on the R4S Gateway applica-
tion installation is available through the link: www.readyforsky.com/r4sgateway
III. CLEANING AND MAINTENANCE
Try to avoid activating the dry-boil protection as this can reduce the life of the appliance.
operating system) onto your smartphone or tablet.
For the minimum supported OS version, see the company's official website www.redmond.
company or the application description at the App Store and Google Play.
on the screen.
of the appliance is the same as the model number. You can set a new name or
stop installation by default.
the screen of the mobile device. While connecting the kettle to the control
panel the 100°C and 85°С or
and 55°С indicators will light up in turn.
To ensure a stable connection, the mobile device should be no more than 15 metres
from the appliance.
Before cleaning, unplug the kettle and leave it to cool down.
Do not clean with abrasives or chemical substances not recommended for items that
come into contact with foodstuffs.
SkyKettle RK-M170S-E
GBR
FRA
DEU
NLD
ITA
ESP
PRT
DNK
NOR
SWE
FIN
LTU
LVA
EST
ROU
HUN
BGR
HRV
SVK
CZE
POL
RUS
GRE
TUR
UKR
KAZ
9

Publicité

Table des Matières
loading

Table des Matières