Safety Regulations - LEM MachineTest 204 Manuel D'utilisation

SAFETY REGULATIONS

2. SAFETY REGULATIONS
This measuring device is only to be installed and operated by qualified
personnel and according to the technical data in compliance with the
safety precautions and regulations set forth below. Additionally, the use
of this equipment requires compliance with all legal and safety
regulations pertaining to each specific application. Similar regulations
apply to the use of accessories.
Operating electrical devices implies that parts of the device carry
dangerous voltages. Disregarding warning notices may lead to serious
physical injury and material damage.
It can be assumed that safe operation is no longer possible if the device
• shows visible damage,
• has been exposed to unfavourable conditions (e.g. storage
beyond the permissible climatic limits without adaptation to
the ambient climate, dewing etc.) or
• has been exposed to major strain during transport
(e.g. been dropped from some height without visible
external damage etc.).
Qualified Personnel
are persons familiar with the setting up, installation, starting off and operation of the
device and possess a formal qualification required for such activities.
Special warnings in order to assure operator's safety while carrying out the tests:
If the test instrument is used in manner not specified in this manual the
protection provided by the instrument may be impaired!
Do not use the instrument in explosive atmosphere!
In case of blown any fuse, follow the instructions in this manual to replace it!
Service intervention or calibration procedure is allowed to be carried out only by
a competent authorised person!
4