Removing And Replacing The Warming Drawer - Samsung NE597N0PBSR Manuel D'utilisation

3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
5. Close the oven door.

REMOVING AND REPLACING THE WARMING DRAWER

CAUTION
How to remove the warming drawer
1. Pull out the drawer until it stops
2. Locate the locking clips near the back of each full-extension roller guide rail. Using two hands,
push down on the left clip and lift up on the right clip to release the clips. Pull the drawer the
rest of the way out.
Push down on the left guide
3. Pull the warming drawer away from the range.
How to replace the warming drawer
1. Position the ends of the full-extension roller guide rails in
the side rails in the drawer opening.
2. Push in the drawer to close it and snap the locking clips into place.
(BEST) NE597N0PBSR_AC_DG68-00427A-02_EN.indd 64
Hinge lock
Turn the power OFF before removing the warming drawer.
Lever
Unlocked position
maintaining your appliance _64
Locked position
Lever
Pull up on the right guide
Right roller guide rail
08/11/2012 16:02:45