Samsung NE597N0PBSR Manuel D'utilisation page 28

Use Quality Cookware in Good Condition
• Cookware not centered on Cooking Zone
surface.
• Curved or warped pan bottoms or sides.
• Pan does not meet the minimum size
required for the Cooking Zone used. See the
"Size of pans" section (28 page).
• Pan bottom rests on cooktop trim or does
not rest completely on the cooktop surface.
• Heavy handle tilts pan.
ANY one of the incorrect conditions listed above may be detected by the sensors located
below the ceramic cooktop surface. If the cookware does not meet one or more of these
conditions, one or more of the Cooking Zones will not heat, and settings will flash in the
affected Cooking Zone display. Correct the problems before attempting to activate the
cooktop.
27_ induction cooking
(BEST) NE597N0PBSR_AC_DG68-00427A-02_EN.indd 27
INCORRECT CORRECT
• Cookware centered correctly on Cooking
Zone surface.
• Flat pan bottom & straight sides.
• Pan size meets or exceeds the recommended
minimum size for the Cooking Zone. See the
"Size of pans" section (28 page).
• Pan rests completely on the Cooktop surface.
• Pan is properly balanced.
08/11/2012 16:02:24