Electrical Connection; Technical Data - Inventum IMC6150RK Mode D'emploi

ELECTRICAL CONNECTION

Check that the voltage in your home corresponds with the voltage printed on the appliance.
These groups in the meter must be secured with at least 16 amps each. The connection cable must have a cross-section of at least
2.5mm² and must have a length of at least 1.5 m. When the cable is too short, you have no room to already connect the oven and place
it against the wall before plugging it in.
THE FITTING OF THE APPLIANCE
• Check that the cabinet and the space for the oven meet the dimension and ventilation
requirements.
• Slide the oven into the cabinet. Make sure the housing of the oven does not come in contact
with the walls of the kitchen cabinet. Make sure there is at least 2 mm between the casing
and the walls of the kitchen cabinet. Make sure the oven is centered between the walls of
the kitchen cabinet. Note: Make sure the cable is not stuck and does not lie on top of the
appliance.
• Open the oven door.
• Use the provided screws to fasten the appliance to the cabinet.
• The opening between the cabinet and the top of the oven must never be closed. This is a
ventilation opening.
• Close the oven door and plug the appliance in.
• The oven is now ready for use.

technical data

Rated voltage
Maximum power
Rated output power (microwave)
Rated current
Oven capacity
External dimensions without handle
Net weight
230 V ~50Hz
3600W
900W
16A
50 L
454 x 595 x 565 mm (HWxD)
Approx. 41 kg
English • 31