Manufacturer´s Declarations; Correct Disposal Of This Product; Fcc Statement - LD Systems LD DS21 Manuel D'utilisation

Indicators:
Line inputs:
Line input connections:
Line outputs:
Line output connections:
Computer interface:
Mains connection:
Operating voltage:
Power consumption:
Fuse:
Ambient temperature (in operation):
Relative air humidity:
Weight:
Dimensions (W x H x D)
Other features:
LDDS21 editing software
Compatibility:
Required interface:
MANUFACTURER´S DECLARATIONS
MANUFACTURER'S WARRANTY & LIMITATIONS OF LIABILITY
You can find our current warranty conditions and limitations of liability at: http://www.adamhall.com/media/shop/downloads/documents/
manufacturersdeclarations.pdf. To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9,
61267 Neu Anspach / Email: Info@adamhall.com / +49 (0)6081 / 9419-0.

CORRECT DISPOSAL OF THIS PRODUCT

(valid in the European Union and other European countries with a differentiated waste collection system)
This symbol on the product, or on its documents indicates that the device may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal. Please dispose of this product separately from other waste
and have it recycled to promote sustainable economic activity. Household users should contact either the retailer where they purchased
this product, or their local government office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed
with other commercial waste for disposal.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation
CE Compliance
Adam Hall GmbH states that this product meets the following guidelines (where applicable):
R&TTE (1999/5/EC) or RED (2014/53/EU) from June 2017
Low voltage directive (2014/35/EU)
EMV directive (2014/30/EU)
RoHS (2011/65/EU)
The complete declaration of conformity can be found at www.adamhall.com.
Furthermore, you may also direct your enquiry to info@adamhall.com.
multi-functional LC display, 2 x 16 characters, illuminated
2
XLR symmetrical
3
XLR symmetrical
USB-B
IEC power socket
90–250 V AC, 50–60 Hz
18 VA
T1AL/250 V (5 x 20 mm)
0 °C – 50 °C
10% – 70%, non-condensing
1.8 kg
482 x 44.5 x 160 mm
power cable included, free editing software, 6 memory slots for presets (can be edited
via software)
Windows operating system (Windows XP and later)
USB-A (minimum 2.0)
13