Preparing The Machine; Program Selection; Auxiliary Functions - Summit DW242WADA Manuel D'utilisation

Preparing the Machine

1. Open the door of the dishwasher.
2. Place the dishes in accordance with the instructions in this user manual.
3. Make sure that the upper and lower impellers rotate freely.
4. Put adequate amount of detergent into the detergent dispenser.
5. Check if the Salt and Rinse Aid indicators light and add salt and/or rinse aid, if needed.

Program Selection

1. Press the On/Off key to turn on your machine. Note that the door of the dishwasher is in the
OPEN position.
2. Refer the "Programs Table" to determine a washing program suitable of your dishes.
3. Press program selection key until the number of the program you selected appears on the
display.
In order to start the selected program, Start/Pause key must be pressed and the door of the
diswasher must be closed within 4 seconds after the Start/Pause key is pressed.
If the door is not closed within 4 seconds, the machine will not start. In this case, to start the selected
program, the door must be opened, the Start/Pause key must be pressed and the door must be
closed again within 4 seconds after the Start/Pause key is pressed.
If the door of the machine is opened when the machine is running, the machine stops working. If the
door is closed back within 4 seconds after the door is opened, the machine will continue.
If the door stays open for more than 4 seconds, Start/Pause key must be pressed and the door of
the diswasher must be closed within 4 seconds after the Start/Pause key is pressed.

Auxiliary Functions

The washing programs are designed to obtain the best cleaning effect, considering the type of the
soil, soiling degree and properties of the dishes to be washed. Auxiliary functions are provided in
order to enable you to save time, water, and energy and to perform a more comfortable washing
with conditions specific to you.
1. Auxiliary functions may cause changes in the program duration.
2. Auxiliary functions are not suitable for all washing programs. The dishwasher will make a
warning sound, and the auxiliary function will not activate, if it is used with an incompatible
washing program.
To add auxiliary function to the program:
1. Select the desired washing program by pressing the Program Selection key.
2. In the selected washing program, if an auxiliary function is selected, the corresponding function
LED will illuminate. If the Half Load or Options key is pressed again, the corresponding LED of
another auxiliary function will illuminate.
3. The selection of the auxiliary function will be cancelled when you press the Half Load or Options
button until the selected option LED turns off.
Sanitize Option
The sanitize function raises the water temperature in the final rinse.
1. At the end of a successful sanitization, "00" is displayed.
2. "Available programs and options are indicated on program Table and Options Table charts.
23