Programming The Wash Time - Summit DW242WADA Manuel D'utilisation

Extra Fast Option
Select the Extra Fast option to decrease the duration of a washing program, providing more
economical water usage.
Extra Dry Function
The machine changes the water temperature from the value described for each different
program and the extra dry is performed.
Hi-Temp Function
Select the Hi-Temp option by pressing Options key for 3 seconds. When this option is
selected, both the water temperature and of the washing time are increased.
Half Load Function
It is used to operate the machine without loading it completely.
1. Load your dishes in the machine as you like.
2. Turn the machine on with On/Off key.
3. Select the desired program and press the Half Load key. The Half Load indicator will illuminate
on the display.
4. Press Start/Pause key to start the selected program and close the door of the machine.
5. With the Half Load function, you can save power while using the lower and/or upper racks of the
machine.
Programming The Washing Time
Delay Timer
The Delay Timer function can be used to wash your dishes during appropriate hours. You can delay
the start of the selected program for up to 19 hours. Delay Timer cannot be set after the program
starts.
To set the Delay Timer:
1. Press the Delay Timer function key after selecting the washing program and other auxiliary
functions.
2. Once you press the Delay Timer key, Display will show "1h" and the display will show the
program number, program duration and delay time alternately for 2 seconds.
3. Set the desired time by pressing the Delay Timer key. Time will increase with the increments of 1
hour every time you press the key.
4. In order to start the selected program with delay, press the Start/Pause key and close the
dishwasher door within 4 seconds.
NOTE: The use of Delay Timer has a special case.
Assume that you have selected a program with delay and pressed Start/ Pause key. After a length of
time, you have opened the door of the machine. If the door of the machine is closed within 4
seconds, the machine resumes on for the duration of the delay timer. If the door is not closed within
4 seconds, the machine pauses the delay timer. In this case, to continue the delay timer, the door
must be opened, the Start/Pause key must be pressed and the door must be closed again within 4
seconds after the Start/Pause key is pressed.
Changing the settings while Delay Timer is enabled:
While the Delay Timer function is activated, you cannot make changes in the washing program,
auxiliary functions or the duration of the delay time.
24