Spray Arms; Cleaning The Impellers - Summit DW242WADA Manuel D'utilisation

Spray Arms

Check whether or not the holes for the upper and lower spray
arms are clogged. If there is any clogging, remove the spray
arms and clean them under runing water.
You can remove the lower spray arm by pulling it upwards, while
the upper spray arm nut can be removed by turning the nut to
the left.
Be sure that the nut is perfectly tightened when refitting the
upper spray arm.

Cleaning The Impellers

Clean the impellers at least once a week in order for the machine operates efficiently.
Lower Impeller
Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the
impeller. Pull the lower impeller up to remove it (A, B.)
Upper Impeller
Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the
impeller. Turn its nut to left to move the upper impeller (A, B)
Make sure that the nut is tightened well when installing the upper impeller.
27