Levelling The Instrument; Wall/Base Mount; Initial Calibration - OHAUS Catapult 5000 Serie Manuel D'instructions

EN-8
2.4

Levelling the Instrument

Some models include leveling feet and a level indicator. To level these instruments, adjust the feet so the
bubble is centered in the circle of the level indicator. Be sure the equipment is level each time its location is
changed.
2.5

Wall/Base Mount

A Wall / Base mounting bracket and screws are provided.
Base mounting:
Models: C51XE6R, C51XE30R,
C51XE50R, C51XE200R:
Wall mounting:
2.6

Initial Calibration

For best results, the instrument's calibration should be checked prior to first use. If adjustment is needed,
refer to the Calibration section of the instruction manual.
Models: C51XE30L, C51XE50L,
C51XE100L ,C51XE200L,
C51XE30X, C51XE50X,
C51XE100X, C51XE200X:
CATAPULT 5000 SERIES SCALES