Parity; Stop Bit; Handshake; Stable Only - OHAUS Catapult 5000 Serie Manuel D'instructions

CATAPULT 5000 SERIES SCALES

3.8.3 Parity

Set the data bits and parity.
7 EVEN = 7 data bits, even parity.
7 Odd = 7 data bits, odd parity.
7 NONE = 7 data bits, no parity.
8 NONE = 8 data bits, no parity.

3.8.4 Stop Bit

Set the number of stop bits.
1 = 1 stop bit.
2 = 2 stop bits.

3.8.5 Handshake

Set the flow control method.
NONE = no handshaking.
ON-OFF = XON/XOFF software handshaking.

3.8.6 Stable Only

Set the print criteria.
OFF = values are printed immediately.
ON = values are only printed when the stability criteria are met.

3.8.7 Auto Print

Set the automatic printing functionality.
OFF
= disabled.
ON.StAb
= printing occurs each time the stability criteria are met.
INtEr
= printing occurs at the defined interval.
CONt
= printing occurs continuosly.
When INtEr is selected, set the Print Interval.
1 to 3600 (seconds)
EN-21