Setup Menu; Reset; Capacity - OHAUS Catapult 5000 Serie Manuel D'instructions

EN-14
3.4

Setup Menu

When the Indicator is used for the first time, enter this menu
to set the Capacity and Graduation.

3.4.1 Reset

Reset the Setup menu to the factory defaults.
No = not reset.
Yes = reset.
NOTE: If the Legal for Trade switch is switched to ON position, the Capacity, Graduation,
Zero Range and settings are not reset.

3.4.2 Capacity

Set the scale capacity from 5 to 20000. Refer to the Setup Table 3.3 for available settings.
CAUTION:
Once the Capacity value has been changed, the graduation value might also need to be changed.
Please refer to table 3.3 for the corresponding graduation values and section 3.4.3 on how to set
the graduation.
CATAPULT 5000 SERIES SCALES
Reset
Capacity
Graduation
Power On Unit
Zero Range
End Setup
No, Yes
5...20000 kg
0,0005...20 kg
Auto, kg, g, lb
2 %, 100 %
Exit SETUP menu